New IEC Power Entry Modules for Snap-in Mounting
Press Release
New IEC Power Entry Modules for Snap-in Mounting
The new FN 9264S IEC Power Entry Modules extend market leader Schaffner's wide-ranging product line with a 2-pole power switch version for snap-in mounting. The standard version can be used for a panel thickness from 1.0 to 2.5mm and is appealing due to very good damping characteristics and an outstanding performance/size ratio.
FN 9264S filter modules with their standard IEC C14 inlet combine the function of the proven Schaffner EMC/EMI filter with a 2-pole rocker switch in a compact, fully shielded steel housing and enable a fast and safe mounting. Faston connectors make it easy to connect the cable to the device. Thanks to the optimized metal surface the filter modules ensure optimum interference suppression even with narrow space to magnetic components or cables inside the device. EMC/EMI filters of the FN9264S series are designed for a maximum continuous operating voltage of 250 VAC and are available with rated currents from 1A to 10A. | ![]() |
Naturally, these filters have been reviewed by UL, CSA, ENEC and CQC for worldwide application. They are RoHS and REACH compliant and fulfill the IEC/EN60601-1 requirements for medical applications with the low leakage version (B type).
For individual support contact your local Schaffner branch office or your nearest Schaffner affiliate.
Luterbach, December 10, 2012