Schaffner Details

ECOsine® Economy Line for 200 V - 240 VAC

Press Release

ECOsine® Economy Line for 200 V - 240 VAC

The Schaffner Group further broadens its product offering of solutions for the improvement of power quality. The popular ECOsine® Economy Line passive harmonic filters are now available for applications in the voltage range of 200V to 240VAC.

The new filter series with the designation FN 3416LV (50 Hz) and FN 3418LV (60 Hz) extend the application range of the ECOsine® Economy Line down to 200 V to 240 VAC and offer a cost-effective solution for harmonics mitigation particularly suitable for applications requiring superior THDi performance and with limited available space.

Both new series are intended to be used for harmonic mitigation of three-phase installations with diode or thyristor bridge interfaces, enabling to achieve a target THDi of < 7% in presence of a DC-link inductor. Furthermore, both rectifier peaks current as well as RMS input current are reduced and the grid current is back to its sinusoidal shape. Lower electrical losses and improved power factor allow an enhanced and more efficient utilization of electrical system capacity.

The user-friendly filter concept allows for a quick installation and commissioning without the need of thorough system analysis and the involvement of specialists. The high performance is guaranteed not only at full load, but a power factor close to unity is possible even under demanding partial load operation. Even without DC-link choke installed and with no de-rating, a THDi of < 13% can be achieved.

The FN 3416LV ECOsine® filters for 50 Hz grids are available with standard ratings from 2.5 to 90 kW while ECOsine® FN 3418LV filters for 60 Hz grids are available with standard ratings from 2.5 to 125 HP. All filters are UL-listed, CE-marked and RoHS compliant. They are particularly suitable for AC and DC motor drives, battery chargers and further power electronics applications with 6-pulse input rectifiers.

For further information, please visit www.myecosine.com or get in touch with your local Schaffner sales point or Schaffner partner for individual support.

Luterbach, February 2, 2015


Archive

EMC filter for single phase applications - newly introduced DC approval. The very popular single phase EMC filter portfolio of Schaffner is extended by additional high performance versions of the filter families FN 2010, FN 2030 and FN 2090. In addition, all the filters in the complete portfolio of FN 2000 are now available with DC approval as standard.
15.05.
The Schaffner Group continuous to broaden ecosine evo series, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.02.
The Schaffner Group introduces ecosine evo, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.11.
New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications
24.10.
SchaffnerPQS3 – New version of Schaffner Power Quality Simulator
05.09.
Compact current-compensated chokes up to 10 A
15.08.
Schaffner introduces the newest generation of 690/600 VAC dv/dt filters
25.04.
Schaffner introduces the newest generation of dv/dt filters
05.10.
ECOsine ® High Power Line Enclosed
14.07.
Schaffner is raising the bar with new high current AC- and DC EMC/EMI filters
18.05.
ECOsine® Economy Line for 200 V - 240 VAC
02.02.
ECOsine ® Active – new harmonic filters with Germanischer Lloyd (GL)
20.10.
“iF Product Design Award” 2014 for Schaffner IEC inlet filters
14.04.
ECOsine – new high power filter modules for system integration
20.01.
ECOsine ® Active – new harmonic filters for 690 V systems
30.08.
Power Cord with Locking System for IEC Inlets
08.04.
Sine wave filter FN5040HV for 600VAC and 690 VAC drives
18.03.
SchaffnerPQS – New Power Quality Simulator
14.02.
New IEC Power Entry Modules for Snap-in Mounting
10.12.
Lockable Power Cord IL13 with new Swiss Safety Mains Plug
05.11.
ECOsine™ Economy Line – cost-effective harmonics mitigation
29.10.
ECOsine™ Active – new harmonic filters for 200V systems
31.08.
New flexible IEC inlet filter series FN9280 and FN9290
18.06.
UL-Approval for Sinusoidal Filters FN5040/45
03.05.
More functionality - simple product search - efficient dialogue options - iPad app
01.03.
Current-compensated chokes for the circuit board up to 80A
06.02.
New IEC Power Entry Modules with 2-pole Power Switch
30.11.
Power cord with locking system for IEC inlets
23.09.
Low leakage EMC filters now available with UL approval
26.08.
Schaffner expands IEC power entry module family with safety version
28.02.
Latest generation passive filters for low harmonic 690V drives
31.01.
Schaffner Group and Rockwell Automation intensify cooperation
02.12.
Liquid cooled dv/dt filters for power electronics
22.11.
New sinusoidal filters FN5040/45 ensure cooler and more reliable drives
28.07.
New EMC/EMI filter FN 3268 from Schaffner - compatible with modern residual current operated devices
29.03.