Schaffner Details

New flexible IEC inlet filter series FN9280 and FN9290

Press Release

New flexible IEC inlet filter series FN9280 and FN9290

The Schaffner Group has expanded its product range by the single-stage FN9280 and double-stage FN9290 IEC inlet filters. The new EMC/EMI filter modules with type C14 IEC appliance inlet set the benchmark due to their ultra-compact design, patented combined switch and fuse holder unit, the versatile flange mount system for fast and flexible installation and are either deliverable with fast-on or spring cage terminals.

Despite the compact design of the filter with a height of only 46mm, the combined unit with dual fuse holder provides extra space for a spare fuse. The dual pole power switch disconnects all poles of the device from the mains and can be removed for maintenance thanks to the integration into the combined unit in order to specifically avoid accidental connection and power-on.

For cabling inside the device, the new IEC inlet filters are available with proven fast-on tabs or spring cage terminals for faster and vibration-proof wiring.

The new flange mount system with either horizontal or vertical mounting holes provides maximum flexibility for front or back mounting. Because of the RF tight joining of the flange frames with the deep-drawn steel housings an optimal shielding even against strong magnetic fields has been achieved.


The FN9280 series is equipped with proven single-stage EMC/EMI filters. The FN9290 series requiring the identical panel cutout has a double-stage EMC/EMI filter with an attenuation of up to 80dB and is ideally suited for applications with higher interference levels. The B versions of both series with a minimal leakage current of 5uA max. are suited for use in medical devices. The FN9280 series can optionally be delivered as E version with earth line choke for additional asymmetric interference suppression.

The new series are designed for currents from 1 to 10A with a rated voltage up to 250Vac. They are approved for worldwide use according to UL, CSA, ENEC and CQC and conform to RoHS and REACH. The B-versions comply with the requirements of the active third edition of the safety standard IEC/EN60601-1 for medical devices.

For more information visit our website www.schaffner.com or contact your local Schaffner branch office or Schaffner partner for individual advice.

Luterbach, 18 June, 2012


Archive

EMC filter for single phase applications - newly introduced DC approval. The very popular single phase EMC filter portfolio of Schaffner is extended by additional high performance versions of the filter families FN 2010, FN 2030 and FN 2090. In addition, all the filters in the complete portfolio of FN 2000 are now available with DC approval as standard.
15.05.
The Schaffner Group continuous to broaden ecosine evo series, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.02.
The Schaffner Group introduces ecosine evo, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.11.
New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications
24.10.
SchaffnerPQS3 – New version of Schaffner Power Quality Simulator
05.09.
Compact current-compensated chokes up to 10 A
15.08.
Schaffner introduces the newest generation of 690/600 VAC dv/dt filters
25.04.
Schaffner introduces the newest generation of dv/dt filters
05.10.
ECOsine ® High Power Line Enclosed
14.07.
Schaffner is raising the bar with new high current AC- and DC EMC/EMI filters
18.05.
ECOsine® Economy Line for 200 V - 240 VAC
02.02.
ECOsine ® Active – new harmonic filters with Germanischer Lloyd (GL)
20.10.
“iF Product Design Award” 2014 for Schaffner IEC inlet filters
14.04.
ECOsine – new high power filter modules for system integration
20.01.
ECOsine ® Active – new harmonic filters for 690 V systems
30.08.
Power Cord with Locking System for IEC Inlets
08.04.
Sine wave filter FN5040HV for 600VAC and 690 VAC drives
18.03.
SchaffnerPQS – New Power Quality Simulator
14.02.
New IEC Power Entry Modules for Snap-in Mounting
10.12.
Lockable Power Cord IL13 with new Swiss Safety Mains Plug
05.11.
ECOsine™ Economy Line – cost-effective harmonics mitigation
29.10.
ECOsine™ Active – new harmonic filters for 200V systems
31.08.
New flexible IEC inlet filter series FN9280 and FN9290
18.06.
UL-Approval for Sinusoidal Filters FN5040/45
03.05.
More functionality - simple product search - efficient dialogue options - iPad app
01.03.
Current-compensated chokes for the circuit board up to 80A
06.02.
New IEC Power Entry Modules with 2-pole Power Switch
30.11.
Power cord with locking system for IEC inlets
23.09.
Low leakage EMC filters now available with UL approval
26.08.
Schaffner expands IEC power entry module family with safety version
28.02.
Latest generation passive filters for low harmonic 690V drives
31.01.
Schaffner Group and Rockwell Automation intensify cooperation
02.12.
Liquid cooled dv/dt filters for power electronics
22.11.
New sinusoidal filters FN5040/45 ensure cooler and more reliable drives
28.07.
New EMC/EMI filter FN 3268 from Schaffner - compatible with modern residual current operated devices
29.03.