Schaffner All products

  • Output filters

    Shaping electrical power

    Output filters

    Help to avoid problems that can result in purely functional difficulties to very severe motor damage

Sort by

8 products were found.

FN 5020

Sine wave output filter for high-speed motor drives

  • Output filters
  •  » Sine wave filters
  • Smoothing of PWM drive output voltages
  • Increased service life of expensive high-speed motors
  • Reduction of audible motor noise
  • Improvement of system reliability
  • Production up-time for mission critical applications
Motor cable length : ≤200 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V

FN 5030

Add-on Sine Wave Module for Common-mode Voltage Improvement

  • Output filters
  •  » Sine wave plus filters
  • Additional module for use with FN 5020 and FN5040/45 sine wave filters
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 600 Hz
Motor power : 15 to 75 kW
Rated current : 25 to 120 A
Switching frequency : 6 to 15 kHz
Voltage : 0 to 500 V
FN 5040/FN 5045: LC Sine Wave Filter for Motor Drives

UL 61800-5-1 up to 750 A for FN 5040, 480 A for FN 5045. For use with AC or DC drives (power conversion equipment) only

FN 5040/FN 5045

LC Sine Wave Filter for Motor Drives

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Perfect motor protection
  • Reduce bearing currents
  • Motor frequency up to 200 Hz
  • Extended motor cable length capability
Motor cable length : ≤2000 m
Motor frequency : 0 to 70 Hz
Motor power : 1.1 to 630 kW
Rated current : 4.5 to 1200 A
Switching frequency : 2 to 12 kHz
Voltage : 0 to 500 V
FN 5040 HV: LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives Applications

(UL up to 300 A)

FN 5040 HV

LC Sine Wave Filter for 600 VAC and 690 VAC Motor Drives Applications

  • Output filters
  •  » Sine wave filters
  • Smooth sine wave without voltage peaks
  • Motor protection against pulse pattern stress
  • Improvement of system reliability
  • Reduces bearing currents
  • Ideal for retrofit installations
  • Fits for long motor cable lengths (≤2000 m)
  • Motor drive power range up to 1,200 kW
Motor cable length : ≤2000 m
Motor frequency : 0 to 70
Motor power : 7.5 to 1200 kW
Rated current : 13 to 1320 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 690 V
FN 5060: Output Filter for Motor Drives

Under preparation for UL recognized

FN 5060

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 5.5 to 630 kW
Rated current : 12 to 1100 A
Switching frequency : 2 to 16 kHz
Voltage : 0 to 500 V
FN 5060 HV: Output Filter for Motor Drives

Under preparation: UL recognized label up to 320 A

FN 5060 HV

Output Filter for Motor Drives

  • Output filters
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 60 Hz
Motor power : 15 to 1000 kW
Rated current : 30 to 1200 A
Switching frequency : 0 to 16 kHz
Voltage : 0 to 760 V

FN 510

Output Filter for Motor Drives

  • Output filters
  •  » dv/dt filters
  • Reduction of drive output voltage dv/dt
  • Restriction of overvoltages on motor cables
  • Reduction of motor temperature
  • Increase of motor service life
  • Improvement of system reliability
Motor cable length : ≤80 m
Motor frequency : 0 to 400 Hz
Motor power : 1.5 to 30 kW
Rated current : 4 to 66 A
Switching frequency : 2 to 16 kHz
Voltage : 380 to 500 V

FN 530

Sine Wave and EMC Output Filter for Motor Drives with a DC Link Access

  • Output filters
  •  » Sine wave plus filters
  • Smoothing of PWM drive output voltage
  • Efficient motor protection
  • Reduction of common-mode interferences on motor cables
  • Improvement of EMC environment
  • Elimination of motor bearing damages
  • Possibility to use very long unshielded motor cables
  • Improvement of system reliability
Motor cable length : ≤1000 m
Motor frequency : 0 to 200 Hz
Motor power : 1.5 to 7.5 kW
Rated current : 4 to 16 A
Switching frequency : 6 to 20 kHz
Voltage : 0 to 520 V