Schaffner Details

The Schaffner Group introduces ecosine active sync series, the new generation of modular, compact, effective and reliable active harmonic filters.

Schaffner, the international leader in the field of electromagnetic compatibility and power quality, is again setting a benchmark with its product offering for harmonics mitigation solutions. ecosine active sync utilises superior technology to reliably mitigate excessive harmonics with an evolutionary modular product concept.

With the new ecosine active sync filters FN 3530/31/40/41, FN 3532/42 and FN 3545 Schaffner now offers the most effective harmonic mitigation solution available, especially for mixed load and dynamic load profiles. By deploying ecosine active sync filters it is possible to achieve a THID ≤ 5%. They also guarantee compliance with the toughest requirements of IEEE-519 and other stringent international power quality standards while being the most effective and compact active harmonic filters available in the market. The filters demonstrate excellent performance over an extended temperature range (power module 0 - 50°C full performance, up to 55°C with derating). With the installation of the new ecosine active sync filters, harmonic current mitigation, reactive power compensation as well as load balancing can be efficiently achieved and international power quality standards complied with. Furthermore, the electrical infrastructure is unburdened and its utilization is much more efficient and reliable.

With their modular concept ecosine active sync filters offer a unique market leading flexibility, which enables optimal customer-tailored solutions. Ecosine active sync filter systems can be easily installed as wall-mount devices based on 60 Arms power modules. These modules are available in IP 20 and IP 21 protection class and in 3-phase 3-wire and 3-phase 4-wire configurations. Two power modules in a master-slave architecture can be configured as a dedicated solution for 120 Arms. The Double Power Pack (DPP) offers real 120 Arms without derating up to +50°C. For higher current ratings, up to 5 ecosine active sync power modules can be connected in parallel to mitigate harmonic current up to 300 Arms. This can be done either as a wall-mount solution or within Schaffner’s new IP 54 air-cooled cabinet. Aligning product offerings with international market requirements and customer expectations, the new Schaffner modular filters ensure the best tailored solutions and optimal fit for demanding applications and networks.

Ecosine active sync filters FN 3530/31/32 are designed for 50 Hz and 60 Hz, 380 VAC to 480 VAC 3-phase 3-wire power grid, while the FN 3540/41/42 are designed for 5 0Hz and 60 Hz, 380 VAC to 415 VAC 3- phase 4-wire grid. Power modules and DPP are available as protection category IP 20 (IP 21 as an option), while cabinet versions are of IP 54. All filters are CE-marked and RoHS compliant. Ecosine active sync filters are simple to install and maintain and are fully integrated in Schaffner’s popular and simple to use online power quality simulator the SchaffnerPQS3.

For further information, please visit the landing page, impulse.schaffner.com/ecosine-active-sync or get in touch with your local Schaffner sales point or Schaffner partner for individual support.

Luterbach, 16. April 2018

Press Release (PDF)

 

 

 

 

 

 

 

 

Archive

Foundation stone laid for new Schaffner headquarters in Luterbach
03.07.
Schaffner Common Mode Choke Initiative – New extension to the portfolio
12.06.
Schaffner high-end IEC Power Entry Modules now meet IEC IEC62368-1. For use in Audio/Video, Information and Communications equipment.
26.04.
The Schaffner Group introduces ecosine active sync series, the new generation of modular, compact, effective and reliable active harmonic filters.
16.04.
EMC filter for single phase applications - newly introduced DC approval
22.01.
New RT chokes current compensated chokes up to 20 A
09.10.
New EMI filtering solution for electric vehicles
30.08.
New Multi–Tier lockable IEC Socket
16.08.
EMC filter for single phase applications - newly introduced DC approval. The very popular single phase EMC filter portfolio of Schaffner is extended by additional high performance versions of the filter families FN 2010, FN 2030 and FN 2090. In addition, all the filters in the complete portfolio of FN 2000 are now available with DC approval as standard.
15.05.
The Schaffner Group continuous to broaden ecosine evo series, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.02.
The Schaffner Group introduces ecosine evo, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.11.
New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications
24.10.
SchaffnerPQS3 – New version of Schaffner Power Quality Simulator
05.09.
Compact current-compensated chokes up to 10 A
15.08.
Schaffner introduces the newest generation of 690/600 VAC dv/dt filters
25.04.
Schaffner introduces the newest generation of dv/dt filters
05.10.
ECOsine ® High Power Line Enclosed
14.07.
Schaffner is raising the bar with new high current AC- and DC EMC/EMI filters
18.05.
ECOsine® Economy Line for 200 V - 240 VAC
02.02.
ECOsine ® Active – new harmonic filters with Germanischer Lloyd (GL)
20.10.
“iF Product Design Award” 2014 for Schaffner IEC inlet filters
14.04.
ECOsine – new high power filter modules for system integration
20.01.
ECOsine ® Active – new harmonic filters for 690 V systems
30.08.
Power Cord with Locking System for IEC Inlets
08.04.
Sine wave filter FN5040HV for 600VAC and 690 VAC drives
18.03.
SchaffnerPQS – New Power Quality Simulator
14.02.
New IEC Power Entry Modules for Snap-in Mounting
10.12.
Lockable Power Cord IL13 with new Swiss Safety Mains Plug
05.11.
ECOsine™ Economy Line – cost-effective harmonics mitigation
29.10.
ECOsine™ Active – new harmonic filters for 200V systems
31.08.
New flexible IEC inlet filter series FN9280 and FN9290
18.06.
UL-Approval for Sinusoidal Filters FN5040/45
03.05.
More functionality - simple product search - efficient dialogue options - iPad app
01.03.
Current-compensated chokes for the circuit board up to 80A
06.02.
New IEC Power Entry Modules with 2-pole Power Switch
30.11.
Power cord with locking system for IEC inlets
23.09.
Low leakage EMC filters now available with UL approval
26.08.
Schaffner expands IEC power entry module family with safety version
28.02.
Latest generation passive filters for low harmonic 690V drives
31.01.
Schaffner Group and Rockwell Automation intensify cooperation
02.12.
Liquid cooled dv/dt filters for power electronics
22.11.
New sinusoidal filters FN5040/45 ensure cooler and more reliable drives
28.07.
New EMC/EMI filter FN 3268 from Schaffner - compatible with modern residual current operated devices
29.03.