Schaffner Details

New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications

Press Release

New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications

EMC/EMI filters on the AC- and DC side of inverters and converters contribute significantly to the compliance with the EMC directive and do improve the system reliability. Schaffner presents the most compact and most modern products in the market, with the introduction of the new FN221x HV and FN331x HV series. It is based upon the combination of innovative component technology and design knowhow to enable economic EMC solutions between 250 A and 2’300 A.

Schaffner, the international leader in the fields of electromagnetic compatibility and power quality, introduces the new FN 22xx HV and FN 33xx HV standard filters for high current applications for 690 VAC and 1’500 VDC PV inverters, converters and motor drives. These innovative filters are optimized for the requirements of photovoltaic-, power conversion-, energy storage- and motor control systems and take into consideration Schaffner’s extensive global application experience with AC- and DC power systems.

Along with appropriately sized 690 VAC EMC/EMI filters FN 331x HV on the line side, the new FN 221x HV DC filters help to meet the limits of binding EMC standards for PV installations in Europe and other regions. Further, the 1’500 VDC filter FN 221x HV will help to increase the service life of the solar panel, improve its reliability, and reduce potential interference radiations of the panel, by keeping away the inverter-born high-frequency and leakage currents.

FDIS recently approved the new international CISPR11, Ed.6.0 standard, which defines now the conducted emission limits at the DC power ports of "Grid Connected Power Conditioners".

The extremely compact AC filters FN 331x help to meet the already well known EMC standards and are optimized to suit the most modern inverter design requirements of various power converter types.

The new filters will require much less installation space compared to traditional solutions, due to the optimized attenuation performance levels. They also offer minimum power loss related to the rating of the inverter and thus help to maximize the system efficiency.

Both bus-bar filter series are available with ratings from 250 A to 2’300 A. Versions without capacitors to ground are also available as standard product for specific AC- and DC power system requirements.

All models are CE, UL, CSA and ENEC (FN 331x HV) approved and RoHS compliant.

More detailed information is available on www.schaffner.com and from all Schaffner partners.

Luterbach, October 24, 2016

For more information:
 

Charles Vanhouteghem

Frank Almer

Product Marketing Manager

Head of Corporate Communication

T + 41 32 681 67 18 (direct)

T +41 32 681 68 80 (direct)

charles.vanhouteghem@schaffner.com

frank.almer@schaffner.com

Schaffner EMV AG
4542 Luterbach, Switzerland
T +41 32 681 66 26
F +41 32 681 66 41
www.schaffner.com

Photo download: http://www.schaffner.com/media/pictures/products/


Archive

EMC filter for single phase applications - newly introduced DC approval. The very popular single phase EMC filter portfolio of Schaffner is extended by additional high performance versions of the filter families FN 2010, FN 2030 and FN 2090. In addition, all the filters in the complete portfolio of FN 2000 are now available with DC approval as standard.
15.05.
The Schaffner Group continuous to broaden ecosine evo series, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.02.
The Schaffner Group introduces ecosine evo, the new generation of passive harmonic filters with an evolutionary modular concept and unparalleled technology.
22.11.
New high current EMC/EMI filters for 690 VAC- or 1’500 VDC Applications
24.10.
SchaffnerPQS3 – New version of Schaffner Power Quality Simulator
05.09.
Compact current-compensated chokes up to 10 A
15.08.
Schaffner introduces the newest generation of 690/600 VAC dv/dt filters
25.04.
Schaffner introduces the newest generation of dv/dt filters
05.10.
ECOsine ® High Power Line Enclosed
14.07.
Schaffner is raising the bar with new high current AC- and DC EMC/EMI filters
18.05.
ECOsine® Economy Line for 200 V - 240 VAC
02.02.
ECOsine ® Active – new harmonic filters with Germanischer Lloyd (GL)
20.10.
“iF Product Design Award” 2014 for Schaffner IEC inlet filters
14.04.
ECOsine – new high power filter modules for system integration
20.01.
ECOsine ® Active – new harmonic filters for 690 V systems
30.08.
Power Cord with Locking System for IEC Inlets
08.04.
Sine wave filter FN5040HV for 600VAC and 690 VAC drives
18.03.
SchaffnerPQS – New Power Quality Simulator
14.02.
New IEC Power Entry Modules for Snap-in Mounting
10.12.
Lockable Power Cord IL13 with new Swiss Safety Mains Plug
05.11.
ECOsine™ Economy Line – cost-effective harmonics mitigation
29.10.
ECOsine™ Active – new harmonic filters for 200V systems
31.08.
New flexible IEC inlet filter series FN9280 and FN9290
18.06.
UL-Approval for Sinusoidal Filters FN5040/45
03.05.
More functionality - simple product search - efficient dialogue options - iPad app
01.03.
Current-compensated chokes for the circuit board up to 80A
06.02.
New IEC Power Entry Modules with 2-pole Power Switch
30.11.
Power cord with locking system for IEC inlets
23.09.
Low leakage EMC filters now available with UL approval
26.08.
Schaffner expands IEC power entry module family with safety version
28.02.
Latest generation passive filters for low harmonic 690V drives
31.01.
Schaffner Group and Rockwell Automation intensify cooperation
02.12.
Liquid cooled dv/dt filters for power electronics
22.11.
New sinusoidal filters FN5040/45 ensure cooler and more reliable drives
28.07.
New EMC/EMI filter FN 3268 from Schaffner - compatible with modern residual current operated devices
29.03.