DATASHEET
IEC Inlet Filters FN 9260
General Purpose Power Entry Module with Fuses
2019
25 Mar 2019
EMC/EMI Products
FN 9260: General Purpose Power Entry Module with Fuses
  • Rated currents up to 10 A
  • For one or two fuses
  • Optional safety version (A type)
  • Complies with IEC/EN 60601-1
  • Snap-in versions (S type)

Performance indicators

Technical specifications

Maximum continuous operating voltage

250 VAC, 50/60 Hz

Operating frequency

DC to 400 Hz

Rated currents

1 to 10 A @ 40°C max.

High potential test voltage

P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec (standard types)
P –> N 1700 VDC for 2 sec (B types)

Protection category

IP 40 according to IEC 60529

Temperature range (operation and storage)

-25°C to +85°C (25/85/21)

Design corresponding to

UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939

Flammability corresponding to

Inlet plastic: UL 94 V-0
Fuseholder plastic: UL 94 V-0

MTBF @ 40°C/230 V (Mil-HB-217F)

2,200,000 hours

Fuse holder

1 or 2 fuses (Ø5 x 20 mm) (certified to IEC 60127-6)

Operating voltage

250 VAC, 50/60 Hz

Approvals

The FN 9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. Choosing FN 9260 product line brings you rapid availability of a standard filter associated with the necessary safety acceptances. Standard IEC connector filters are a practical solution helping you to pass EMI system approval in a short time. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.

Features and Benefits

  •  Exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior
  • B types comply with the requirements of IEC/EN 60601-1 for creepage and clearance, leakage current and high potential testing
  • Versions up to 10 A are available with fuse holder for one or two fuses
  • Custom-specific versions are available on request

Typical applications

  • Portable electrical and electronic equipment
  • Medical equipment
  • Small to medium-sized machines and household equipment
  • Single-phase power supplies, switch-mode power supplies
  • Test and measurement equipment

Typical electrical schematic

Filter selection table

Filter

Rated current

Leakage current*

Inductance

Capacitance

 

Resistance

Input/Output

Fuses

Weight

@ 40°C (25°C) @ 250 VAC/50 Hz L Cx Cy R connections

 

 

(@ 120 VAC/60 Hz)

 

 

 

 

 

 

 

[A]

[mA]

[mH]

[μF]

[nF]

[kΩ]

[Qty]

[g]

FN 9260 x-1-06-y

1 (1.2)

0.31 (0.18)

5.3

0.1

2.2

1000

-06

2

55

FN 9260 x-2-06-y

2 (2.3)

0.31 (0.18)

2.7

0.1

2.2

1000

-06

2

55

FN 9260 x-4-06-y

4 (4.6)

0.31 (0.18)

1.0

0.1

2.2

1000

-06

2

55

FN 9260 x-6-06-y

6 (6.9)

0.31 (0.18)

0.3

0.1

2.2

1000

-06

2

55

FN 9260 x-10-06-y

10 (11.5)

0.31 (0.18)

0.2

0.1

2.2

1000

-06

2

55

 

 

 

 

 

 

 

 

 

 

FN 9260 xA1-1-06-y

1 (1.2)

0.03 (0.02)

5.3

0.1

0.22

1000

-06

2

55

FN 9260 xA-2-06-y

2 (2.3)

0.07 (0.04)

2.7

0.1

0.47

1000

-06

2

55

FN 9260 xA-4-06-y

4 (4.6)

0.07 (0.04)

1.0

0.1

0.47

1000

-06

2

55

FN 9260 xA-6-06-y

6 (6.9)

0.07 (0.04)

0.3

0.1

0.47

1000

-06

2

55

FN9260 xA-10-06-y

10 (11.5)

0.07 (0.04)

0.2

0.1

0.47

1000

-06

2

55

 

 

 

 

 

 

 

 

 

 

FN 9260 xB-1-06-y

1 (1.2)

0.00

5.3

0.1

 

1000

-06

2

55

FN 9260 xB-2-06-y

2 (2.3)

0.00

2.7

0.1

 

1000

-06

2

55

FN 9260 xB-4-06-y

4 (4.6)

0.00

1.0

0.1

 

1000

-06

2

55

FN 9260 xB-6-06-y

6 (6.9)

0.00

0.3

0.1

 

1000

-06

2

55

FN9260 xB-10-06-y

10 (11.5)

0.00

0.2

0.1

 

1000

-06

2

55

 

 

 

 

 

 

 

 

 

 

FN 261 x-1-06-y

1 (1.2)

       0.31 (0.18)

5.3

0.1

2.2

1000

-06

1

55

FN 261 x-2-06-y

2 (2.3)

 0.31 (0.18)

2.7

0.1

2.2

1000

-06

1

55

FN 261 x-4-06-y

4 (4.6)

0.31 (0.18)

1.0

0.1

2.2

1000

-06

1

55

FN 261 x-6-06-y

6 (6.9)

0.31 (0.18)

0.3

0.1

2.2

1000

-06

1

55

FN 261 x-10-06-y

10 (11.5)

0.31 (0.18)

0.2

0.1

2.2

1000

-06

1

55

Product selector

Typical filter attenuation

Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym

FN 9260: 1 to 4 A types

 

 

 

FN 9260: 6 and 10 A types

FN 261: 1 to 4 A types

FN 261: 6 and 10 A types

Mechanical data

FN 9260/FN 261

FN 9260 S/FN 261 S

Panel cut out

Installation

 

 

 

Dimensions

FN 261 FN 261 S
   FN 9260FN 9260 STolerances

A

46

34

±0.3

B

35

35

±0.3

C

36

 

±0.3

D

41

41

±0.3

E

27.8

27.8

+0.3/-0

F

5.5

5.5

±0.3

G

32

32

+0.3/-0

H

Ø3.2

 

±0.1

I

14

14

±0.5

J

12.5

12.5

±0.3

M

R ≤3.5

R ≤3.5

 

N

33

33

+0.3/-0

P

29

29.5

±0.3

R*

M3

 

 

S

90°

 

 

T**

 

0.6-1.5

 

T**

 

1.6-2.5

 

T**

 

2.6-3.5

 

Appropriated products

Accessories for IEC Inlet Filters and Power Entry Modules

The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might be variants of the filters where the accessories are not available.
For further information please ask your local Schaffner Sales Partner and visit our homepage https://www.schaffner.com/.

Power Cord with Locking System for Inlet Filters IL 13, IL 13 P, IL 19

The locking system has a tensile force of typical 200N.
It is recommended to use it with flange mount filters.
Lock Power Cords with IEC Inlets and Filters"
Schaffner power cords with IEC lock guard against
accidental disconnection of all electrical appliances
with an IEC inlet. No exchange or modification of the
IEC inlet or IEC inlet filter system is needed. Easy
retrofit for all electronic equipments and devices.

IEC C13 Rewireable Connector for individual Power Cord with Locking System

Link to Datasheet:  Datasheet IEC C13 rewireable

The locking system has a tensile force of typical 300N. It is recommended to use it with flange mount filters. For details refer to our Application Note "Using IEC Lock Power Cords with IEC Inlets and Filters" Schaffner power connector with IEC lock guard against accidental disconnection of all electrical appliances with an IEC inlet. No exchange or modification of the IEC inlet or IEC inlet filter system is needed. Easy retrofit for all electronic equipments and devices.

IB - Insulating Boots

There is a full range of insulating boots available from Schaffner that provide a physical cover for the exposed terminals on the back of IEC Inlet Filters.
These boots fit the simplest non-fused and unswitched style up to the fully fused and switched IEC filtered inlet. The boots are made from a durable black PVC material that conforms to UL94-V0 flammability requirements. The boots slip easily over the back of the filter and reduce the risk of electrical shock to maintenance personnel whilst protecting the filter from environmental hazard such as the ingress of dust and moisture.

Headquarters, global innovation and development

Switzerland
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com

To find your local partner within Schaffner‘s global network: www.schaffner.com

© 2018 Schaffner Group

The content of this document has been carefully checked and understood. However, neither Schaffner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. Published specifica-tions are subject to change without notice. Product suitability for any area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Schaffner does not guarantee the availability of all published products. This disclaimer shall be governed by substantive Swiss law and resulting disputes shall be settled by the courts at the place of business of Schaffner Holding AG. Latest publications and a complete disclaimer can be downloa-ded from the Schaffner website. All trademarks recognized.

Sales and application centers

China
Schaffner EMC Ltd. Shanghai
T20-3 C, No 565 Chuangye Road,
Pudong district
201201 Shanghai
T +86 21 3813 9500
cschina@schaffner.com
www.schaffner.com.cn

Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 10 567 2855
finlandsales@schaffner.com

France
Schaffner EMC S.A.S.
16-20 Rue Louis Rameau
95875 Bezons
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com

Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com

India
Schaffner India Pvt. Ltd
REGUS WORLD TRADE CENTRE
WTC, 22nd Floor Unit No 2238, Brigade Gateway Campus, 26/1, Dr. Rajkumar Road Malleshwaram (W)
560055 Bangalore
T +91 80 67935355
indiasales@schaffner.com

Italy
Schaffner EMC S.r.l.
Via Ticino, 30
20900 Monza (MB)
T +39 039 21 41 070
italysales@schaffner.com

Japan
Schaffner EMC K.K.  
Taiju-Seimei Sangenjaya Bldg.
1-32-12, Kamiuma, Setagaya-ku
154-0011 Tokyo
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp

Singapore
Schaffner EMC Pte Ltd.
#05-09, Kg Ubi Ind. Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com

Spain
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E
El Soto de Moraleja, Alcobendas
28109 Madrid
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com

Sweden
Schaffner EMC AB  
Östermalmstorg 1
114 42 Stockholm
T +46 8 5050 2425
swedensales@schaffner.com
www.schaffner.com

Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
switzerlandsales@schaffner.com

Taiwan R.O.C.
Schaffner EMV Ltd.
20 Floor-2, No 97, Section 1, XinTai 5th Road
22175 XiZhi District New Taipei City 22175
T +886 2 2697 5500
F +886 2 2697 5533
taiwansales@schaffner.com
www.schaffner.com.tw

Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14

51000 Lamphun
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com

United Kingdom
Schaffner Ltd.  
5 Ashville Way, Molly Millars Lane
Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com

USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffnerusa.com

USA
Schaffner North America
6722 Thirlane Road
24019 Roanoke, Virginia
T +1 276 228 7943
F +1 276 228 7953

USA
Schaffner North America
823 Fairview Road
24382 Wytheville, Virginia
T +1 276 228 7943
F +1 276 228 7258