Features and benefits

  • Efficient reduction of high output voltage dv/dt from IGBT motor drives (as per IEC 60034-17/25)
  • Restriction of overvoltages caused by line reflections on motor cables (as per IEC 60034-17/25)
  • Protection of motor winding insulation from premature aging and destruction
  • Increase service life of electric motors
  • Patented solution without capacitors and resistors for ease of installation and increased reliability
  • Less interference propagation towards neighbouring equipment or lines
  • Output filter with low impedance, ideal for processes requiring exceptional precision and reproducibility of movements
DATASHEET
Output filters FN 5060 HV
Output Filter for Motor Drives
2019
01 Apr 2019
Output filters
FN 5060 HV: Output Filter for Motor Drives
  • Reduction of drive output voltage dv/dt
  • Reduction of voltage stress at motor windings
  • Protect AC motors from destructive effect of peak voltages
  • Increase of motor service life
  • Improvement of system reliability

Performance indicators

Technical specifications

Max. operating voltage

3 ph 760 VAC

Rated currents

30 to 1200 A @ 40°C

Motor frequency

0...60 Hz (with derating up to 120 Hz)

Switching frequency

up to 16 kHz, depending on motor cable lenght and motor frequency -> refer graph on page 2

Typical dv/dt reduction

Factor 8 to 12

Max. peak voltage

≤1850 V (according EN 60034-25B)

Voltage drop

<3 V @ 50 Hz

Rated temperature

+40°C without derating up to 100°C

Operation temperature

-25°C to +100°C (25/100/21)

Transportation and storage temperature

-40°C to +100°C (25/100/21)

Overload capability

1.5 x rated current for 1 minute, once per hour

Protection category

IP 00

Flammability corresponding to

UL 94V-2

Design corresponding to

UL 61800-5-1, CSA 22.2 No.14, EN 61558-2-20

Approvals

UL recognized up to 320 A

Typical applications

  • Motor drive applications with short to medium motor cable length
  • Machinery comprising servo or torque motors
  • Submersible- and irrigation pumps
  • HVAC equipment, incl. pumps, fans and compressors
  • Elevators, hoisting and cranes
  • Motor drives for process lines
  • Applications where sine wave filters are not suited (e.g. high dynamic operation)

Typical electrical schematic

Filter selection table

FilterRated current Nominal **Typical power Input/ Output Weight
@ 40°C/50 Hz inductancelossconnections
[A][mH][W][kg]
FN 5060 HV-30-99300.17641-9912
FN 5060 HV-45-99450.17653-9912.5
FN 5060 HV-75-99750.1478-9923
FN 5060 HV-115-991150.069394-9927
FN 5060 HV-165-991650.051301-99

36

FN 5060 HV-220-992200.035371-9944
FN 5060 HV-320-993200.023383-9959
FN 5060 HV-450-994500.019376-9968
FN 5060 HV-660-996600.012455-99100
FN 5060 HV-900-999000.009550-99111
FN 5060 HV-1200-9912000.007670-99139

Switching frequency vs. motor cable length

Ensure the motor drive switching frequency is set to the required switching frequency (see filter selection table). Check the drives manual whether special settings are necessery. For any questions please contact the drives manufacturer.

Refer also to the “fPWM/cable length” diagram below:

Temperature monitoring function

The temperature monitoring device opens a potential-free contact in the case of filter overtemperature (>180ºC). The maximum switching capability is 5 A/240 V. The switch can be used, for example, in the input of a CNC controller or as the trip of a circuit breaker in order to interrupt the mains power supply.

Mechanical data

30 to 45 A types

75 to 1200 A types

Dimensions

30 A45 A75 A115 A165 A220 A320 A450 A660 A900 A1200 A

A

210210290290290290390390390390390

138143168180191211187209220229260

161161265265314314444496546595642

D  +/-0.7

195195275275275275366366366366366

E +/-0.7

111116113.5128.5138.5158.5120.5120.5130.5140.5160.5
160.5FØ7(4x)Ø7(4x)Ø7(4x)Ø7(4x)Ø7(4x)Ø7(4x)Ø9(4x)Ø9(4x)Ø9(4x)Ø9(4x)Ø9(4x)

4545555555557575757575

606090909090120120120120120

25259788101011

10

17

44444455555

K

M6M6M8M8M8M8M8M8M8M8M8
L126126194194245244331381432481533
M4444414141407576767575
N334465668
O77151515151525252525
P303030303050505050
QØ8(6x)Ø8(6x)Ø11(6x)Ø11(6x)Ø11(6x)Ø11(6x)Ø11(6x)Ø13.5(6x)Ø13.5(6x)Ø13.5(6x)Ø13.5(6x)
R888888

12

12121212
S7.57.57.57.57.57.51212121212
TØ18(2x)Ø18(2x)Ø18(2x)Ø18(2x)Ø20(2x)Ø20(2x)Ø20(2x)Ø20(2x)Ø20(2x)

Please note:
Make sure to consult and respect local, national and international safety codes.
Connect the protective earth terminal(s) first, before attempting to connect phase terminals.
Please consult the documents „Mounting and Installation Guidelines“ being shipped with the product.

For additional information please consult the document „Basis in EMC and Power Quality“, published in the download section of www.schaffner.com.

Headquarters, global innovation and development

Switzerland
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com

To find your local partner within Schaffner‘s global network: www.schaffner.com

© 2018 Schaffner Group

The content of this document has been carefully checked and understood. However, neither Schaffner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. Published specifica-tions are subject to change without notice. Product suitability for any area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Schaffner does not guarantee the availability of all published products. This disclaimer shall be governed by substantive Swiss law and resulting disputes shall be settled by the courts at the place of business of Schaffner Holding AG. Latest publications and a complete disclaimer can be downloa-ded from the Schaffner website. All trademarks recognized.

Sales and application centers

China
Schaffner EMC Ltd. Shanghai
T20-3 C, No 565 Chuangye Road,
Pudong district
201201 Shanghai
T +86 21 3813 9500
cschina@schaffner.com
www.schaffner.com.cn

Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 10 567 2855
finlandsales@schaffner.com

France
Schaffner EMC S.A.S.
16-20 Rue Louis Rameau
95875 Bezons
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com

Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com

India
Schaffner India Pvt. Ltd
REGUS WORLD TRADE CENTRE
WTC, 22nd Floor Unit No 2238, Brigade Gateway Campus, 26/1, Dr. Rajkumar Road Malleshwaram (W)
560055 Bangalore
T +91 80 67935355
indiasales@schaffner.com

Italy
Schaffner EMC S.r.l.
Via Ticino, 30
20900 Monza (MB)
T +39 039 21 41 070
italysales@schaffner.com

Japan
Schaffner EMC K.K.  
Taiju-Seimei Sangenjaya Bldg.
1-32-12, Kamiuma, Setagaya-ku
154-0011 Tokyo
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp

Singapore
Schaffner EMC Pte Ltd.
#05-09, Kg Ubi Ind. Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com

Spain
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E
El Soto de Moraleja, Alcobendas
28109 Madrid
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com

Sweden
Schaffner EMC AB  
Östermalmstorg 1
114 42 Stockholm
T +46 8 5050 2425
swedensales@schaffner.com
www.schaffner.com

Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
switzerlandsales@schaffner.com

Taiwan R.O.C.
Schaffner EMV Ltd.
20 Floor-2, No 97, Section 1, XinTai 5th Road
22175 XiZhi District New Taipei City 22175
T +886 2 2697 5500
F +886 2 2697 5533
taiwansales@schaffner.com
www.schaffner.com.tw

Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14

51000 Lamphun
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com

United Kingdom
Schaffner Ltd.  
5 Ashville Way, Molly Millars Lane
Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com

USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffnerusa.com

USA
Schaffner North America
6722 Thirlane Road
24019 Roanoke, Virginia
T +1 276 228 7943
F +1 276 228 7953

USA
Schaffner North America
823 Fairview Road
24382 Wytheville, Virginia
T +1 276 228 7943
F +1 276 228 7258