DATASHEET
HV Line (5% THID) FN 3410 HV 690
Ecosine 50 Hz Passive Harmonic Filters
2019
13 Feb 2019
Ecosine passive
FN 3410 HV 690: Ecosine 50 Hz Passive Harmonic Filters
  • Filters for 3-phase diode and SCR rectifiers
  • The industry standard for AC and DC and motor drives
  • The most compact 5% THID filter available
  • Excellent behavior under partial load conditions
Technical specifications

Nominal operating voltage

3x 690 VAC

Operating frequency

50 Hz ±1 Hz

Total harmonic current distortion THID*

<5% @ rated power (filters ≤37 kW)
~5% @ rated power with DC-link choke (filters ≥45 kW)

Nominal motor drive input power rating

7.5 to 250 kW

Nominal motor drive input current rating

10 to 320 A @ 50°C

Total demand distortion TDD

According to IEEE-519, table 10-3

Voltage tolerance range

3x 586 to 760 VAC

Efficiency

>98% @ nominal line voltage and power

High potential test voltage

P –> E 2500 VAC (1 min)

Protection category

IP 20

Cooling

Internal fan cooling

Overload capability

1.6x rated current for 1 minute, once per hour

Ambient temperature range

–25°C to +50°C fully operational
–25°C to +85°C transport and storage
+50°C to +70°C derated operation***

Flammability corresponding to

UL 94 V-2 or better

Design corresponding to

UL 508, EN 61558-2-20, CE (LVD 2006/95/EC)

MTBF @ 50°C/460 V (Mil-HB-217F)

200,000 hours

SCCR****

100 kA

Earthing System

TN, TT, IT

Approvals

Features and benefits

Schaffner ecosine harmonic filters represent an economical solution to the challenge of load-applied harmonics mitigation in three-phase power systems. With a plug-and-play approach and more compact dimensions than comparable products, they can be quickly installed and easily commissioned. They increase the reliability and service life of electric installations, help utilize electric sytem capacity better, and are the key to meet Power Quality standards such as IEEE-519. Ecosine filters calm your harmonic waves. Schaffner ecosine filters can be applied to virtually any kind of power electronics with front-end six-pulse rectifiers, where harmonic current distortion needs to be reduced to defined limits. Typical applications, where the above-mentioned non-sinusoidal consumers of power can account for a significant portion of the load, include:

Typical applications

  • Equipment with front-end six-pulse rectifier
  • AC and DC motor drives
  • Factory automation equipment
  • Water/wastewater treatment facilities
  • Fan and pump applications
  • HVAC installations
  • Mission-critical processes
  • DC fast chargers

Typical electrical schematic

Filter selection table FN 3410 HV 690

Filter*Rated load power
Power loss**min. required LDC***min. required LAC***Input/OutputCapacitorWeight
@ 690 VAC/50 Hz@ 690 VConnectionsdisconnections
[kW][W][mH][mH][kg]
FN 3410 HV-10-447.54150-44-4420
FN 3410 HV-13-4411209-44-4421
FN 3410 HV-16-3315270-33-4429
FN 3410 HV-24-3318.5333-33-4433
FN 3410 HV-32-5322374-53-3344
FN 3410 HV-38-5330480-53-3348
FN 3410 HV-45-5337555-53-3356
FN 3410 HV-60-35456102.3131.565-35-3458
FN 3410 HV-75-35556901.1690.835-35-3462
FN 3410 HV-90-35758601.1430.776-35-3477
FN 3410 HV-110-35909600.8670.595-35-3491
FN 3410 HV-150-4011011450.6960.431-40-35131
FN 3410 HV-180-4013212750.580.37-40-35147
FN 3410 HV-210-4016016000.4780.325-40-35169
FN 3410 HV-260-9920019400.390.268-99-35230
FN 3410 HV-320-9925025000.2690.184-99-35233

Mechanical data

FN 3410 HV 690

FN 3410 HV 690

FN 3410 HV 690

Installation. Detailed installation and wiring instructions as well as cooling requirements can be found in the user manual available from every Schaffner sales point or from www.myecosine.com


Dimensions

10131624323845607590110150180210260320
A43043052052059059059075075075075083083083010551055
B210210250250300300300320320320320450450450500500
C210210280280300300300300300300300320320320360360
E41041049549556556556572572572572580080080010251025
F170170200200250250250270270270270350350350400400
G991111111111111111111111111313
JM6M6M8M8M8M8M8M10M10M10M10M10M10M10M10M10
V2525
W66
X12.512.5
Y5050
Z1111

All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m/EN 22768-m

Filter connector cross sections

-33-34-35-40-44-53
Solid wire16 mm235 mm250 mm295 mm210 mm225 mm2
Flex wire10 mm225 mm250 mm295 mm26 mm216 mm2
AWG type wire AWG 6AWG 2AWG 1/0AWG 4/0AWG 8AWG 4
Recommended torque1.5-1.8 Nm4.0-4.5 Nm7-8 Nm17-20 Nm1.0-1.2 Nm2.0 - 2.3 Nm

Please visit www.schaffner.com to find more details on filter connectors.

Headquarters, global innovation and development

Switzerland
Schaffner Group
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com

To find your local partner within Schaffner‘s global network: www.schaffner.com

© 2018 Schaffner Group

The content of this document has been carefully checked and understood. However, neither Schaffner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. Published specifica-tions are subject to change without notice. Product suitability for any area of application must ultimately be determined by the customer. In all cases, products must never be operated outside their published specifications. Schaffner does not guarantee the availability of all published products. This disclaimer shall be governed by substantive Swiss law and resulting disputes shall be settled by the courts at the place of business of Schaffner Holding AG. Latest publications and a complete disclaimer can be downloa-ded from the Schaffner website. All trademarks recognized.

Sales and application centers

China
Schaffner EMC Ltd. Shanghai
T20-3 C, No 565 Chuangye Road,
Pudong district
201201 Shanghai
T +86 21 3813 9500
cschina@schaffner.com
www.schaffner.com.cn

Finland
Schaffner Oy
Sauvonrinne 19 H
08500 Lohja
T +358 10 567 2855
finlandsales@schaffner.com

France
Schaffner EMC S.A.S.
16-20 Rue Louis Rameau
95875 Bezons
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com

Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
T +49 721 56910
F +49 721 569110
germanysales@schaffner.com

India
Schaffner India Pvt. Ltd
REGUS WORLD TRADE CENTRE
WTC, 22nd Floor Unit No 2238, Brigade Gateway Campus, 26/1, Dr. Rajkumar Road Malleshwaram (W)
560055 Bangalore
T +91 80 67935355
indiasales@schaffner.com

Italy
Schaffner EMC S.r.l.
Via Ticino, 30
20900 Monza (MB)
T +39 039 21 41 070
italysales@schaffner.com

Japan
Schaffner EMC K.K.  
Taiju-Seimei Sangenjaya Bldg.
1-32-12, Kamiuma, Setagaya-ku
154-0011 Tokyo
T +81 3 5712 3650
F +81 3 5712 3651
japansales@schaffner.com
www.schaffner.jp

Singapore
Schaffner EMC Pte Ltd.
#05-09, Kg Ubi Ind. Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com

Spain
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E
El Soto de Moraleja, Alcobendas
28109 Madrid
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com

Sweden
Schaffner EMC AB  
Östermalmstorg 1
114 42 Stockholm
T +46 8 5050 2425
swedensales@schaffner.com
www.schaffner.com

Switzerland
Schaffner EMV AG
Nordstrasse 11
4542 Luterbach
T +41 32 681 66 26
switzerlandsales@schaffner.com

Taiwan R.O.C.
Schaffner EMV Ltd.
20 Floor-2, No 97, Section 1, XinTai 5th Road
22175 XiZhi District New Taipei City 22175
T +886 2 2697 5500
F +886 2 2697 5533
taiwansales@schaffner.com
www.schaffner.com.tw

Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14

51000 Lamphun
T +66 53 58 11 04
F +66 53 58 10 19
thailandsales@schaffner.com

United Kingdom
Schaffner Ltd.  
5 Ashville Way, Molly Millars Lane
Wokingham
RG41 2PL Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com

USA
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffnerusa.com

USA
Schaffner North America
6722 Thirlane Road
24019 Roanoke, Virginia
T +1 276 228 7943
F +1 276 228 7953

USA
Schaffner North America
823 Fairview Road
24382 Wytheville, Virginia
T +1 276 228 7943
F +1 276 228 7258