- Excellent filter performance for applications with high interference levels
- Filters for two-phase supply up to 2x 520 VAC (P-P) available
- Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A
- Industrial grade terminal blocks for unsurpassed electrical safety
Performance indicators
Maximum continuous operating voltage |
2x 520/300 VAC (H types) |
Nominal operating voltage |
480 VAC (H types) |
Rated currents |
8 to 45 A @ 50°C (FN 2412) |
Overload capability |
4x rated current at switch on, |
Operating frequency |
DC to 400 Hz |
High potential test voltage |
P –> P 2250 VDC for 2 sec (H types) |
Temperature range (operation and storage) |
-25°C to +100°C (25/100/21) |
Protection category |
IP 20 |
Flammability corresponding to |
UL 94 V-2 or better |
Design corresponding to |
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939 |
MTBF (Mil-HB-217F) |
>250,000 h (H types) @ 50°C/480 V |
Features and Benefits
- FN 2410 filters up to 100 A are designed for traditional chassis mounting
- For extra fast installation, FN 2412 filters up to 45 A can comfortably be snapped-in on popular TS 35 DIN-rails which are common in most electrical cabinets
- Both FN 2410 and FN 2412 are also avail- able as H versions. These are ideally suitable for an operation on two phases in a three-phase power network, handling voltages up to 520 VAC
- All filters provide an exceptional conducted attenuation performance, based on chokes with high saturation resistance and excellent thermal behavior. Thus, all filters retain the expected filter performance even in very noisy applications and under full load conditions
- Touch-safe industrial grade terminal blocks provide maximum electrical safety and protect humans from undeliberate contact with life conductors. They help to fulfill the most demanding installation standards
Typical Applications
- Small to medium-sized machines and industrial equipment
- High-end single-phase power supplies
- Single-phase variable speed motor drives, inverters and converters
- DIN-rail filter versions are ideal for panel building and electrical cabinets
- Various noisy applications with higher power single-phase or two-phase supply