RWK305RWK305

3-Phase Load Reactors RWK305

Three-phase dv/dt reactor for motor protection

RWK305

Three-phase dv/dt reactor for motor protection

  • Reduction of drive output voltage dv/dt
  • Reduction of motor temperature
  • Increase of motor service life
  • Compact and economic open frame design
  • Standard catalog reactors up to 1100 A
  • UL rated materials used

Features and Benefits

Efficient reduction of high output voltage dv/dt from IGBT motor drives
Protection of motor coil insulation from premature aging and destruction
Significantly increased servie life of electric motors
High reliablility and secured production up time for mission critical applications
Reduced converter pulse load
Less interference propagation towards neighboring equipment of lines
€žOutput filter€œ with low impedance, ideal for processes requiring exceptional pre- cision and reproducibility of movements
Vacuum impregnation for reduced humming noise and high durability

Typical Applications

Servo drives
Close loop vector drives
Motor drive applications with short motor cables
Machinery comprising servo or torque motors
Robots
Pick and place machines

Technical Specifications

Maximum continuous operating voltage

3x530 VAC

Nominal operating voltage

3x500 VAC

Rated currents

4 to 1100 A @ 40°C

Overload capability

2 x rated current at switch on for 30 seconds

1.5 x rated current for 1 minute, once per hour

Typical dv/dt reduction

≥factor 5

Impedance (Uk)

0.8% @ 400 VAC, 50 Hz and rated current

Motor frequency

0 to 60 Hz

Motor cable length

30 m max. @ 16 kHz (see derating curve page 2)

Switching frequency

fPWM 2 to 16 kHz

High potential test voltage

P –> E 3000 VAC for 3 sec

P –> P 3000 VAC for 3 sec

Overvoltage category

OV III (IEC 60664-1)

Temperature range (operation and storage)

-25°C to +100°C (25/100/21) operation and storage

Protection category

IP 00 (KL types according to VBG 4)

Flammability corresponding to

UL 94 V-2

Design corresponding to

EN 61558-2-20 (VDE 0570-2-20), UL 508C, CSA C22.2 NO. 14

Insulation class

T40/N (200°C) for ≤182 A types

T40/F (155°C) for ≥230 A types

MTBF (Mil-HB-217F)

>500,000 h @ 45°C/480 V

Typical electrical schematic

RWK305

Approvals & Compliances

CE Label
RoHS Label
UL Recognized Label (USA)
UKCA Label

UL 508C up to 182 A. For use with AC or DC drives (power conversion equipment) only

Back