Products: 7
FN 5020 Sine wave output filter for high-speed motor drives
- Smoothing of PWM drive output voltages
- Increased service life of expensive high-speed motors
- Reduction of audible motor noise
- Improvement of system reliability
- Production up-time for mission critical applications
- Harmonic mitigation: All
- Motor cable length: ≤200m
- Motor frequency: 0 to 600 Hz
- Motor power: 15 to 75 kW
- Rated Current: 25 to 120 A
- Switching Frequency: 6 to 15 kHz
- Voltage: 0 to 500 V
FN 5030 Add-on common mode module for sine wave output filter
- Additional module for use with FN 5020 sine wave filters only
- Reduction of common-mode interferences on motor cables
- Improvement of EMC environment
- Elimination of motor bearing damages
- Possibility to use very long unshielded motor cables
- Improvement of system reliability
- Harmonic mitigation: All
- Motor cable length: ≤1000m
- Motor frequency: 0 to 600 Hz
- Motor power: 15 to 75 kW
- Rated Current: 25 to 120 A
- Switching Frequency: 6 to 15 kHz
- Voltage: 0 to 500 V
FN 5040 / FN 5045 LC sine wave filter for motor drives
- Smooth sine wave without voltage peaks
- Perfect motor protection
- Reduce bearing currents
- Motor frequency up to 200Hz
- Extended motor cable lenght capability
- Harmonic mitigation: All
- Motor cable length: ≤2000m
- Motor frequency: 0 to 70 Hz
- Motor power: 1.1 to 630 kW
- Rated Current: 4.5 to 1200 A
- Switching Frequency: 2 to 12 kHz
- Voltage: 0 to 500 V
FN 5040 HV Sine wave filter for 690 VAC motor drives applications
- Smooth sine wave without voltage peaks
- Motor protection against pulse pattern stress
- Improvement of system reliability
- Reduces bearing currents
- Ideal for retrofit installations
- Fits for long motor cable lengths (≤ 2000 m)
- Motor drive power range up to 1,200 kW
- Motor cable length: ≤2000m
- Motor frequency: 0 to 70 Hz
- Motor power: 7.5 to 1200 kW
- Rated Current: 13 to 1320 A
- Switching Frequency: 2 to 16 kHz
- Voltage: 0 to 690 V
FN 510 Output filter for motor drives
- Reduction of drive output voltage dv/dt
- Restriction of overvoltages on motor cables
- Reduction of motor temperature
- Increase of motor service life
- Improvement of system reliability
- Harmonic mitigation: All
- Motor cable length: ≤80m
- Motor frequency: 0 to 400 Hz
- Motor power: 1.5 to 30 kW
- Rated Current: 4 to 66 A
- Switching Frequency: 2 to 16 kHz
- Voltage: 380 to 500 V
FN 530 Sine wave and EMC output filter for motor drives with a voltage dc link
- Smoothing of PWM drive output voltage
- Efficient motor protection
- Reduction of common-mode interferences on motor cables
- Improvement of EMC environment
- Elimination of motor bearing damages
- Possibility to use very long unshielded motor cables
- Improvement of system reliability
- Harmonic mitigation: All
- Motor cable length: ≤1000m
- Motor frequency: 0 to 200 Hz
- Motor power: 1.5 to 7.5 kW
- Rated Current: 4 to 16 A
- Switching Frequency: 6 to 20 kHz
- Voltage: 0 to 520 V
RWK 305 Three-phase dv/dt reactor for efficient motor protection
- Reduction of drive output voltage dv/dt
- Reduction of motor temperature
- Increase of motor service life
- Compact and economic open frame design
- Standard catalog reactors up to 1100A
- UL rated materials used
- Harmonic mitigation: All
- Motor cable length: ≤50m
- Motor frequency: 0 to 60 Hz
- Motor power: 1.5 to 630 kW
- Rated Current: 4 to 1100 A
- Switching Frequency: 2 to 16 kHz
- Voltage: 380 to 500 V
Configurator
Categories
08.04.2013
