New sinusoidal filters FN5040/45 ensure cooler and more reliable drives | FN 3268 – New EMC/EMI filter is compatible with modern residual current operated devices | FN 2450 – New low-leakage EMC/EMI filters by Schaffner with ergonomic design |
 |  |  |
The FN5040/45 sinusoidal output filters reduce the extra losses in AC motors and help to prevent premature failures and expensive downtimes. They are precisely matched to the technical requirements of modern drive systems and are particularly impressive when used with long motor cables.
| By using the new EMC/EMI filters FN 3268 from Schaffner, you can prevent costly downtimes and lost production caused by accidental tripping of AC/DC sensitive residual current operated devices used in conjunction with frequency inverters. | Schaffner, the international leader in combining electromagnetic compatibility and power quality, launches the new compact single-phase EMC/EMI filter FN 2450. The low-leakage filter FN 2450 expands the Schaffner product offering of suppression components in plastic housings, which optimally combine innovative lightweight designs with a high level of functionality, safety and ergonomics. |
| High Res (393 KB, 1200 x 799 Px) | High Res (355 KB, 1200 x 831 Px) | High Res (540 KB, 1200 x 920 Px) |
| Low Res (100 KB, 500 x 333 Px) | Low Res (74 KB, 500 x 346 Px) | Low Res (122 KB, 500 x 383 Px) |
ECOsine™ Active – New 60A 4-wire filter for building technology applications | FN 2200 – Schaffner is raising the bar with new EMC/EMI filters for PV (solar) inverters | ECOsine™ Active – The digital solution for excellent Power Quality |
 |  |  |
| Schaffner broadens its ECOsine™ Active family of harmonic filters with a 60A unit in 4-wire configuration that is ideally suited for the application in modern energy efficient buildings. The new active 60A filter provides efficient mitigation of harmonic currents with minimum time lag. It also convinces with compact dimensions, above the average EMC, as well as with reduced audible noise. | EMC/EMI filters on the DC side of PV inverters contribute significantly to the compliance with the EMC directive and to an increased system reliability. With the introduction of the FN 2200
range of filters, Schaffner presents the most compact solution in the market today. It is based upon the combination of innovative technology with years of application specific experience. | Barely one year after the introduction of ECOsine™ passive harmonic filters, Schaffner presents the digital solution for the efficient reduction of system perturbations: ECOsine™ Active. Latest generation electronics enable an intelligent and adaptive compensation of harmonic currents with a response time of less than 300 microseconds. |
| High Res (891 KB, 1200 x 1591 Px) | High Res (475 KB, 1200 x 890 Px) | High Res (693 KB, 1200 x 1588 px) |
| Low Res (180 KB, 500 x 663 Px) | Low Res (103 KB, 500 x 371 Px) | Low Res (144 KB, 500 x 662 px) |
FN 3280 High-performance EMC/EMI filters in four-wire technology now available up to 600 Amps | FN 9244 New EMC/EMI filters with IEC inlet to meet the requirement for high attenuation performance | ECOsine™ Power Quality filters calm down harmonic waves |
 |  |  |
| The popular FN 3280 filter family from Schaffner is now also available for higher power applications thanks to its new frame sizes 300A, 400A and 600A. Complementing the existing series, the new filter models convince with their superior EMC performance, compact dimensions, and low leakage current. | Schaffner’s impressive new FN 9244 filters deliver excellent attenuation performance. They are intended to supplement the existing IEC inlet filter range, are available with various options, and can be mounted in a variety of ways. | The introduction of Schaffner ECOsine™ filters concludes the era of bulky passive harmonic mitigation products. Superior filter topology and advanced temperature management result in high performance filters in a surprisingly compact, lightweight, and contemporary package.
|
| High Res (540 KB, 1200 x 903 px) | High Res (377 KB, 1200 x 847 Px) | High Res (444 KB, 1200 x 847 Px) |
| Low Res (124 KB, 500 x 376 px) | Low Res (97 KB, 500 x 353 Px) | Low Res (105 KB, 500 x 353 Px) |
FN 9222E, FN 9233, FN 9233E EMC filter modules with IEC inlet | FN 9263 New family of IEC modules | FN 3025 and FN 3026 Compact low-leakage filters with innovative plastic design |
 |  |  |
| Schaffner’s new IEC inlet filters impress with their high level of attenuation performance. | Schaffner's new IEC inlet modules impress with their superior attenuation properties and compact design. The FN 9263 filter series include an EMC filter and a mains switch for single-phase switching. | With the launch of the new FN 3025 and FN 3026 three-phase filters, Schaffner is setting clear priorities with respect to the mechanical housing concept. Innovative design approaches make possible EMC filters in compact, light weight design with a lot of functionality and distinctive safety elements.
|
| High Res (532 KB, 1200 x 881 Px) | High Res (464 KB, 1200 x 813 Px) | High Res (350 KB, 1200 x 800 Px) |
| Low Res (119 KB, 500 x 367 Px) | Low Res (109 KB, 500 x 339 Px) | Low Res (93 KB, 500 x 333 Px) |
FN 2030 and FN 2090 Single-phase filters with very high attenuation features | FN 3280 Four-wire interference suppression with more power | FN 2412 EMC filter for DIN rail mounting |
 |  |  |
| Schaffner introduces two new series of single-phase filters. Both the FN 2030 and FN 2090 filter series complement the proven FN 2000 filter family and have been developed for applications which require high attenuation features. | Interference suppression applied directly at the mains input is often the quickest route to the desired EMC result. Compact three-phase/four-wire filters with sufficient attenuation performance play a central role here. Schaffner has now extended the upper range of its popular FN 3280 series to provide compatibility for higher powered installations. | New single-phase filters from Schaffner are convincing in their optimized mounting concept and help the control cabinet builder save considerable amounts of assembly time. Owing to the extended current and voltage ranges, even special applications can now be provided with off-the-shelf interference suppression.
|
| High Res (451 KB, 1200 x 881 Px) | High Res (455 KB, 1200 x 940 Px) | High Res (502 KB, 1200 x 943 Px) |
| Low Res (110 KB, 500 x 367 Px) | Low Res (116 KB, 500 x 392 Px) | Low Res (84 KB, 500 x 393 Px) |
FN 3258 Convincing connection technology | EMC filters for machinery engineering | FN 3270 Compact EMC filter |
 |  |  |
Safety and reliability of electrical installations starts with the contact quality of the conductors. In order to satisfy this fundamental principle even better, Schaffner has expanded the popular FN 3258 series of three-phase filters by a range with touch-safe connecting terminals.
| Based on many years experience in the industrial sector, Schaffner has expanded the existing range of filters by adding additional series of components to cover every conceivable case optimally. These include filters for regenerative drives (FN 3120), components to increase the immunity of machine tool control units (FN 2410), compact three-phase filters meeting the new standard (FN 3275) as well as two new four-wire filters for normal and heightened requirements (FN 3256 and FN 3280). | EMC filters designed to meet the most demanding industrial motor drive applications have been developed by world-leading specialist, Schaffner. The compact new filters FN 3270 target the limits given by Amendment A11 of the power drive product family Standard EN61800-3.
|
| High Res (304 KB, 1181 x 829 px) | High Res (460 KB, 1181 x 826 Px) | High Res (333 KB, 1181 x 787 Px) |
| Low Res (95 KB, 591 x 415 px) | Low Res (135 KB, 591 x 413 Px) | Low Res (97 KB, 591 x 394 Px) |
FN 5020 and FN 5030 Output filters | RWK 305 dv/dt choke | FN 409 Single-phase PCB filter |
 |  |  |
The FN 5020 and FN 5030 filters increase the reliability of entire power drive systems and help to eliminate most problems related to modern frequency inverters. Being a modular system, Sinus Plus can be arranged optimally according to system requirements and application.
| dv/dt chokes RWK 305 designed for use on the output of modern frequency inverters and servo drives offer designers and operators reliable and costeffective motor protection. RWK 305 series chokes are manufactured with an open-frame design, using vacuum impregnation to minimise humming. | Compact new filters, for PCB-mounting in DC-DC converter applications, have been launched by leading EMC filter specialist, Schaffner. The FN 409 series is an extension of the companys widely adopted ranges of PCB filters and is targeted directly at DC applications. |
| High Res (482 KB, 1181 x 844 Px) | High Res (723 KB, 1181 x 1149 Px) | High Res (447 KB, 1181 x 867 Px) |
| Low Res (145 KB, 591 x 422 Px) | Low Res (191 KB, 591 x 575 Px) | Low Res (129 KB, 591 x 434 Px) |
FN 5010 Sinusoidal output filter | FN 3400 Three-phase inlet filter | |
 |  |
The FN 5010 output filter significantly restricts the excessive dv/dt and overvoltage stress on the motor windings caused by the inverter's PWM-signal. This effectively increases the service life of the motor by reducing the likelihood of failure, and the significant down-time costs associated with maintenance or replacement.
| From market-leading filter specialist Schaffner is a new three phase input unit containing a line-reactor and conventional RFI filter. FN 3400 offers efficient and highly cost-effective reduction of harmonics and conducted electromagnetic interference.
| |
| High Res (822 KB, 1048 x 1181 Px) | High Res (676 KB, 1181 x 1116 Px) | |
| Low Res (223 KB, 524 x 591 Px) | Low Res (164 KB, 591x 558 Px) | |
